时间：2022-08-13 22:11:00 来源：http://hm.lgjtxj.com/news852878.html
The "mixing", "stop", "discharge", "acceleration" and "lock release" actions of the mixer are completed on the two operating handles, which can be operated on the left and right sides of the rear of the vehicle. Next, let's talk about the operation method of the loading part of the automatic feeding mixer.
A series of changing positions such as "mixing", "stirring", "stop", "discharge", "high speed" of the operating handle have been marked in the figure below. Please refer to this figure to change the handle position during operation.
Operation guide for mixer truck
Whether the operating handle is switched from "mixing" to "discharging" or from "discharging" to "mixing", it should be kept at the "stop" position for a while before being switched to the next operating position.
Before feeding, check whether there is ponding in the mixing drum. If there is too much ponding, it should be drained. Now the operation method of the operating handle is introduced as follows:
(1) Feed mixing of re哈密自上料搅拌车ady mixed concrete
With the engine idling, turn the feeding and discharging control handle to the "mixing" or "stirring" position. The throttle control handle can be lifted appropriately to increase the engine speed and increase the mixing drum speed.
(2) Mixing of ready mixed concrete and driving of mixer truck
Turn the control handle of incoming and outgoing materials to the "stirring" position; Lock the anti reverse handle in the cab before driving the mixer.
(3) Lock release
Push the operating handle of the push-pull flexible shaft out of the groove of the positioning block in the cab to release the lock.
(4) Discharge of ready mixed concrete
Turn the control handle of incoming and 哈密自上料搅拌车outgoing materials to the position of "discharging" and decide whether to increase the engine speed according to the actual situation to increase the discharging speed.
(5) Stop of mixing drum
Turn the control handle of inlet and outlet unloading to the "stop" position.
The operation method of the loading part of the automatic loading mixer is explained. You can use it as a reference. For more operation matters, please come to our website